From achieved results to new horizonts
» Main » Products » Metal powders » Low- and intermediate-carbon steels for coatings

Low- and intermediate-carbon steels for coatings

AP-FeNi4Cu2Mo Powder
Grade Nominal
Composition
Use
AP-FeNi4Cu2Mo Fe C≤0.12  Ni4 Cu1.5  Mo0.5 A component of powder mixtures for depositing wear-resistant coatings using plasma spraying and welding deposition
AP-FeCr25Mn13Ni3 Fe C0.5  Si0.5  Cr25  Mn13  Ni3 Wear-resistant coatings deposited by plasma spraying. Increased viscosity and wear-resistance for friction with pressure and shocks
AP-X5 Fe base Hardness of 58-62 HRC. High wear-resistance under shocks and slip velocity and in aggressive environments
AP-N10 Fe base Hardness of 40-46 HRC. High wear-resistance under heavy loads and slip velocity and in aggressive environments. Resistant to cavitation
AP-N4 Fe base Hardness of 48-52 HRC. High wear-resistance under heavy loads and slip velocity and in aggressive environments

Requirements for the powders' chemical composition are based on the client's individual specifications.

Particle size: 40-100 microns, 80-160 microns, 80-315 microns, 100-280 microns, 160-315 microns, and others, as agreed.